FunkLoad包装说明

FunkLoad是一个功能和负载网络测试仪,用Python编写的,其主要用例有:

  • Web项目的功能测试,从而回归测试也是如此。
  • 性能测试:通过加载Web应用程序和监控服务器它可以帮助你找出瓶颈,给性能测试的详细报告。
  • 负载测试工具,揭露错误不粗略测试中,如音量测试或寿命测试。
  • 压力测试工具,以压倒Web应用程序资源和测试应用程序的可恢复性。
  • 通过脚本任何网​​络重复性任务编写web代理。

资料来源:http://funkload.nuxeo.org/intro.html
funkload首页 | 卡利funkload回购

  • 作者:伯努瓦Delbosc,Nuxeo的SAS
  • 许可:GPL第二版

包含在funkload包工具

FL-记录 - 启动一个TCPWatch代理和记录活动
[email protected]:~# fl-record -h
Usage
=====
  fl-record [options] [test_name]

fl-record launch a TCPWatch proxy and record activities, then output
a FunkLoad script or generates a FunkLoad unit test if test_name is specified.

The default proxy port is 8090.

Note that tcpwatch.py executable must be accessible from your env.

See http://funkload.nuxeo.org/ for more information.

Examples
========
  fl-record foo_bar
                        Run a proxy and create a FunkLoad test case,
                        generates test_FooBar.py and FooBar.conf file.
                        To test it:  fl-run-test -dV test_FooBar.py
  fl-record -p 9090
                        Run a proxy on port 9090, output script to stdout.
  fl-record -i /tmp/tcpwatch
                        Convert a tcpwatch capture into a script.


Options
=======
--version               show program's version number and exit
--help, -h              show this help message and exit
--verbose, -v           Verbose output
--port=PORT, -p PORT    The proxy port.
--tcp-watch-input=TCPWATCH_PATH, -i TCPWATCH_PATH
                        Path to an existing tcpwatch capture.
--loop=LOOP, -l LOOP    Loop mode.

FL-凭证-CTL - 在XML / RPC服务器上执行动作

[email protected]:~# fl-credential-ctl -h
Usage
=====
  fl-credential-ctl config_file action

action can be: start|startd|stop|restart|status|test

Execute action on the XML/RPC server.


Options
=======
--version    show program's version number and exit
--help, -h   show this help message and exit
--quiet, -q  Verbose output

FL-运行测试 - 启动一个FunkLoad单元测试

[email protected]:~# fl-run-test -h
Usage
=====
  fl-run-test [options] file [class.method|class|suite] [...]

fl-run-test launch a FunkLoad unit test.

A FunkLoad unittest use a configuration file named [class].conf, this
configuration is overriden by the command line options.

See http://funkload.nuxeo.org/ for more information.


Examples
========
  fl-run-test myFile.py
                        Run all tests (including doctest with python2.4).
  fl-run-test myFile.py test_suite
                        Run suite named test_suite.
  fl-run-test myFile.py MyTestCase.testSomething
                        Run a single test MyTestCase.testSomething.
  fl-run-test myFile.py MyTestCase
                        Run all 'test*' test methods and doctest in MyTestCase.
  fl-run-test myFile.py MyTestCase -u http://localhost
                        Same against localhost.
  fl-run-test myDocTest.txt
                        Run doctest from plain text file (requires python2.4).
  fl-run-test myDocTest.txt -d
                        Run doctest with debug output (requires python2.4).
  fl-run-test myfile.py -V
                        Run default set of tests and view in real time each
                        page fetch with firefox.
  fl-run-test myfile.py MyTestCase.testSomething -l 3 -n 100
                        Run MyTestCase.testSomething, reload one hundred
                        time the page 3 without concurrency and as fast as
                        possible. Output response time stats. You can loop
                        on many pages using slice -l 2:4.
  fl-run-test myFile.py -e [Ss]ome
                        Run all tests that match the regex [Ss]ome.
  fl-run-test myFile.py -e '!xmlrpc$'
                        Run all tests that does not ends with xmlrpc.
  fl-run-test myFile.py --list
                        List all the test names.
  fl-run-test -h
                        More options.


Options
=======
--version               show program's version number and exit
--help, -h              show this help message and exit
--quiet, -q             Minimal output.
--verbose, -v           Verbose output.
--debug, -d             FunkLoad and doctest debug output.
--debug-level=DEBUG_LEVEL
                        Debug level 3 is more verbose.
--url=MAIN_URL, -u MAIN_URL
                        Base URL to bench without ending '/'.
--sleep-time-min=FTEST_SLEEP_TIME_MIN, -m FTEST_SLEEP_TIME_MIN
                        Minumum sleep time between request.
--sleep-time-max=FTEST_SLEEP_TIME_MAX, -M FTEST_SLEEP_TIME_MAX
                        Maximum sleep time between request.
--dump-directory=DUMP_DIR
                        Directory to dump html pages.
--firefox-view, -V      Real time view using firefox, you must have a running
                        instance of firefox in the same host.
--no-color              Monochrome output.
--loop-on-pages=LOOP_STEPS, -l LOOP_STEPS
                        Loop as fast as possible without concurrency on pages,
                        expect a page number or a slice like 3:5. Output some
                        statistics.
--loop-number=LOOP_NUMBER, -n LOOP_NUMBER
                        Number of loop.
--accept-invalid-links  Do not fail if css/image links are not reachable.
--simple-fetch          Don't load additional links like css or images when
                        fetching an html page.
--stop-on-fail          Stop tests on first failure or error.
--regex=REGEX, -e REGEX
                        The test names must match the regex.
--list                  Just list the test names.
--pause                 Pause between request, press ENTER to continue.

FL-集结报告 - 分析FunkLoad板凳XML结果文件和输出报表

[email protected]:~# fl-build-report -h
Usage
=====
  fl-build-report [options] xmlfile [xmlfile...]

or

  fl-build-report --diff REPORT_PATH1 REPORT_PATH2

fl-build-report analyze a FunkLoad bench xml result file and output a report.
If there are more than one file the xml results are merged.

See http://funkload.nuxeo.org/ for more information.

Examples
========
  fl-build-report funkload.xml
                        ReST rendering into stdout.
  fl-build-report --html -o /tmp funkload.xml
                        Build an HTML report in /tmp
  fl-build-report --html node1.xml node2.xml node3.xml
                        Build an HTML report merging test result from 3 nodes.
  fl-build-report --diff /tmp/test_reader-20080101 /tmp/test_reader-20080102
                        Build a differential report to compare 2 bench reports,
                        requires gnuplot.
  fl-build-report -h
                        More options.


Options
=======
--version               show program's version number and exit
--help, -h              show this help message and exit
--html, -H              Produce an html report.
--with-percentiles, -P  Include percentiles in tables, use 10%, 50% and 90%
                        for charts, default option.
--no-percentiles        No percentiles in tables display min, avg and max in
                        charts (gdchart only).
--diff, -d              Create differential report.
--output-directory=OUTPUT_DIR, -o OUTPUT_DIR
                        Parent directory to store reports, the directoryname
                        of the report will be generated automatically.
--report-directory=REPORT_DIR, -r REPORT_DIR
                        Directory name to store the report.
--apdex-T=APDEX_T, -T APDEX_T
                        Apdex T constant in second, default is set to 1.5s.
                        Visit http://www.apdex.org/ for more information.

fl-run-bench – Launch a FunkLoad unit test as load test

ro[email protected]:~# fl-run-bench -h
Usage
=====
  fl-run-bench [options] file class.method

fl-run-bench launch a FunkLoad unit test as load test.

A FunkLoad unittest use a configuration file named [class].conf, this
configuration is overriden by the command line options.

See http://funkload.nuxeo.org/ for more information.

Examples
========
  fl-run-bench myFile.py MyTestCase.testSomething
                        Bench MyTestCase.testSomething using MyTestCase.conf.
  fl-run-bench -u http://localhost:8080 -c 10:20 -D 30 myFile.py \
      MyTestCase.testSomething
                        Bench MyTestCase.testSomething on localhost:8080
                        with 2 cycles of 10 and 20 users during 30s.
  fl-run-bench -h
                        More options.


Options
=======
--version               show program's version number and exit
--help, -h              show this help message and exit
--url=MAIN_URL, -u MAIN_URL
                        Base URL to bench.
--cycles=BENCH_CYCLES, -c BENCH_CYCLES
                        Cycles to bench, this is a list of number of virtual
                        concurrent users, to run a bench with 3 cycles with 5,
                        10 and 20 users use: -c 2:10:20
--duration=BENCH_DURATION, -D BENCH_DURATION
                        Duration of a cycle in seconds.
--sleep-time-min=BENCH_SLEEP_TIME_MIN, -m BENCH_SLEEP_TIME_MIN
                        Minimum sleep time between requests.
--sleep-time-max=BENCH_SLEEP_TIME_MAX, -M BENCH_SLEEP_TIME_MAX
                        Maximum sleep time between requests.
--test-sleep-time=BENCH_SLEEP_TIME, -t BENCH_SLEEP_TIME
                        Sleep time between tests.
--startup-delay=BENCH_STARTUP_DELAY, -s BENCH_STARTUP_DELAY
                        Startup delay between thread.
--as-fast-as-possible, -f
                        Remove sleep times between requests and between tests,
                        shortcut for -m0 -M0 -t0
--no-color              Monochrome output.
--accept-invalid-links  Do not fail if css/image links are not reachable.
--simple-fetch          Don't load additional links like css or images when
                        fetching an html page.
--label=LABEL, -l LABEL
                        Add a label to this bench run for easier
                        identification (it will be appended to the directory
                        name for reports generated from it).
--enable-debug-server   Instantiates a debug HTTP server which exposes an
                        interface using which parameters can be modified at
                        run-time. Currently supported parameters:
                        /cvu?inc=<integer> to increase the number of CVUs,
                        /cvu?dec=<integer> to decrease the number of CVUs,
                        /getcvu returns number of CVUs
--debug-server-port=DEBUGPORT
                        Port at which debug server should run during the test

fl-monitor-ctl – Execute action on the XML/RPC server

[email protected]:~# fl-monitor-ctl -h
Usage
=====
  fl-monitor-ctl config_file action

action can be: start|startd|stop|restart|status|test

Execute action on the XML/RPC server.


Options
=======
--version    show program's version number and exit
--help, -h   show this help message and exit
--quiet, -q  Verbose output

FunkLoad Usage Example

[email protected]:~# coming soon